Thinking about fixing a 40- to 50-year-old boiler? Be extra cautious! The Baxi Bermuda 552 is a classic model that’s still found in many older homes. But what if it refuses to ignite or shows mysterious faults? Repairing such an old unit is possible, but remember — it’s an antique, and choosing the wrong tradesperson can lead to dangerous outcomes. So, you must know who can repair a Baxi Bermuda 552 Boiler safely.
Today, we’ll explain what a Baxi Bermuda 552 is, who can repair it, and how to troubleshoot common problems. Let’s get started.
What Is A Baxi Bermuda 552 Boiler?
The Baxi Bermuda 552 is a gas-fired back boiler that was popular in UK homes from the 1970s through the early 1990s. It’s a unit installed behind a decorative gas fire, typically embedded in the living room fireplace.
This boiler provides heating for both central heating and hot water. What’s remarkable about the Baxi Bermuda 552 is its relatively high efficiency, which holds up well compared to some modern boilers. Here’s a quick overview:
- Type of Boiler: Regular.
- Mounting Position: Back Boiler Unit (BBU).
- Fuel Type: Gas mains
- Age of the Model: Approximately 40-50 years old
- Efficiency: 66.0%(winter), 56.0%(summer).
- Placement: Hidden inside the fireplace cavity, with the firefront exposed outside.
Who Can Repair A Baxi Bermuda 552 Boiler?
Since the Baxi Bermuda 552 is an outdated model, make sure to hire a qualified technician who has solid experience and understanding of working with these old boilers. Let’s explore who can repair a Baxi Bermuda 552:
Baxi Approved Installers:
Opt for a Baxi-approved company like Smart Plumbing and Heating Bristol, staffed by fully licensed, Gas Safe-registered engineers. Choosing a Baxi-approved installer is the best option for repairing your Baxi Bermuda 552 boiler.
Gas Safe Registered Engineers:
Gas Safe-registered engineers are legally permitted to work on gas boilers like the Baxi Bermuda 552. They are qualified to service this vintage model. Make sure to verify their license and credentials before hiring.
Experienced Heating Engineers:
Heating engineers who are Gas Safe registered and have previously worked on Baxi Bermuda 552 model can easily repair similar units. Experience with this particular model is a valuable asset for any heating professional.
How To Troubleshoot Baxi Bermuda Boiler Issues?
Start by troubleshooting your boiler before calling a professional. If it still doesn’t work after some basic checks, stop and contact qualified technicians.
Common boiler problems include:
- No ignition: The flame sensor, gas valve, or thermocouple might be faulty.
- Blocked flues: Obstructions in flues or chimneys can cause issues. A smoke test or fire spillage test can identify these problems.
- Frequent shutdowns: Check the ignition electrode for damage or misalignment.
- No hot water or heating: Blocked isolation valves or airlocks could be to blame.
Troubleshooting a Baxi Bermuda 552 boiler:
- Reset the system: If the red lockout light is on, press and hold the reset button for 3-5 seconds.
- Check pressure: Ensure the pressure gauge reads above one bar. If not, repressurise following your manual’s instructions.
- Verify thermostat settings: Make sure it’s set correctly and actively calling for heat.
- Air bleed radiators: Release trapped air to improve circulation.
In Conclusion
Repairing a back boiler like the Baxi Bermuda 552 model isn’t a task for amateurs. Instead of risking DIY mishaps, it’s best to leave the repair work to qualified professionals. Now that you know who can repair a Baxi Bermuda 552 boiler, selecting the right tradesperson becomes easier.
Remember, a faulty or improperly repaired Baxi boiler can emit dangerous Carbon Monoxide gas. Always hire a dependable professional to guarantee safety and proper functioning.
FAQ About Baxi Bermuda 552 Boiler Repair
Why is my Baxi boiler not firing up for heating?
Your Baxi boiler may not be firing up due to a frozen condensate pipe, low pressure, a faulty diverter valve, or incorrect thermostat settings. Inspect these areas if you can. For more serious issues, call in a qualified gas engineer.
Who can service a Baxi boiler?
Only a Gas-Safe registered professional is permitted to service a Baxi boiler. It’s advisable to choose a boiler technician with experience specifically with that model to ensure proper servicing and safety.
Why is the heating not working on my Baxi boiler?
Your Baxi boiler may not heat due to thermostat issues, low pressure, faulty valves, or wrong settings. Check the pressure gauge, thermostat, and look for error codes. Call a professional if needed.
How to fix low pressure on a Baxi boiler?
Locate the filling loop valve underneath the boiler. Open the valve to let water in and increase the pressure. Stop filling when the pressure reaches around 1 bar. Once done, close both valves of the filling loop.
What is the average life of a Baxi boiler?
A Baxi boiler usually lasts about 10 to 15 years, especially if you keep up with annual servicing. Key factors influencing its lifespan include installation quality, maintenance routine, usage, and the water quality in your area.
Where is the reset button on a Baxi boiler?
Look for the reset button on the front control panel—it’s often green, marked with a power symbol, or labelled “RESET.” Sometimes, you need to turn the control dial to the reset or ‘R’ position before pressing.
What is the efficiency of Baxi Bermuda 552?
The Baxi Bermuda 552 boiler has a winter seasonal SAP energy efficiency is 66.0% and a summer seasonal SAP efficiency of 56.0%. It is a non-condensing gas boiler with a maximum power output of 16 kW.
How to reset Baxi Bermuda back boiler?
Locate the reset button or selector switch. If there’s a selector switch, turn it to “R” and hold for 5 seconds. If it’s a reset button, press and hold it for 5 seconds to reset.
What is the cost of a new Baxi boiler?
A new Baxi boiler generally costs between £480 and £3,000. The price varies depending on the specific Baxi model and type you choose.
